Select your engine code below. We'll show you the exact oil grade, capacity, and JLR specification — so you can be sure you're using the right fluid for your Land Rover engine.
Enter your Land Rover engine code to get the correct oil grade, capacity, and specification — instant, free, and based on genuine manufacturer data and UK specialist consensus.
Try it below — this demo covers all major Land Rover engine codes used in the UK.
Select your Land Rover engine from the dropdown — we cover all major codes from 204DTD to 448DT, as well as older units like the TD5 and 300TDI.
Our database combines official JLR oil specifications with UK specialist consensus and 2025 enquiry data [EM‑VERIFIED] to give you the most accurate recommendation.
See the exact grade, viscosity, capacity, and JLR spec — plus links to the relevant Technical Reference pages for detailed service information.
This is one of eight free tools on the site — also try our registration lookup, VIN decoder, and diagnostic wizard for related help.
Select engine code
We look up the oil spec
Get grade, capacity & spec
Always confirm the oil specification in your vehicle handbook. For full fluid details, see our Technical Reference pages.
The oil grade (e.g., 5W‑30) refers to the oil's viscosity — the first number (5W) is the cold-start performance, the second (30) is the viscosity at operating temperature. The JLR specification (e.g., STJLR.03.5006) is the manufacturer's approval standard; using oil that meets this spec is critical for engine longevity and warranty compliance.
The capacity is the total oil required with a new filter. Always check the dipstick after filling and top up as needed — overfilling can be as damaging as underfilling.
For full service intervals and other fluid specifications (coolant, brake fluid, transmission), visit our Technical Reference section or the service schedule for your model.
Oil specifications are sourced from official JLR documentation, cross‑referenced with UK specialist consensus and our proprietary 2025 enquiry data — 24,650 quote requests from EnginesMarket.co.uk and EngineFinders.co.uk [EM‑VERIFIED].
Where manufacturer specs have changed over time (e.g., early vs late Ingenium engines), we note the variation and link to the relevant Technical Reference page for full detail. All data is independently vetted by our panel of Land Rover specialists — learn more about our specialist vetting process and data verification standards.
Yes, completely free with no email required to see your result.
Using the wrong viscosity or specification can reduce fuel economy, increase wear, and in extreme cases lead to engine damage — especially for modern engines with variable valve timing and turbochargers.
Your engine code is on the VIN plate (positions 4‑8) or stamped on the engine block. See our engine code decoder and engine number location guides for help.
Yes, we cover common older engines like the TD5 and 300TDI. For very rare engines, refer to the vehicle handbook or our Technical Reference section.
This tool focuses on engine oil. For coolant, brake fluid, and transmission fluid specifications, see our Technical Reference pages or the service schedule for your model.
No Email GateYour result is free and immediate, always.
Manufacturer‑SourcedSpecs are from official JLR documentation.
12 Vetted JLR SpecialistsEvery result is reviewed by our specialist panel.
100% IndependentNo sponsors, no manufacturer influence.
Use our vetted specialist network for your next oil change or service.
FIND A SPECIALIST → REGISTRATION LOOKUP